Make your own free website on

INGRAM Digital Data Recorders

Removable Front Panel
The Removable Front Panel is a full user interface to the EXTREME1, and eliminates the need for a host PC for setup.  The user can program all parameters and check the supply rail and active input signal, in the field.  After programming, the RFP can be removed to protect it, and to reduce the total mass of the EX1 system.

Use the Function button to scroll through the options and adjust the Gain, Offset, and Pretrigger values by using the Up and Down buttons. Then scroll to Arm and press the Select button...the EX1 is programmed and armed!

After triggering, connect the EX1 to a PC parallel port and dump the 1 Meg x 16 Bit recording into ASCII files.